SmartLogger2000-(10-C, 11-C)
User Manual
Figure 7-65 Connecting the 3G router and the SmartLogger
USB Configuration
After connecting the 3G router to the SmartLogger properly, you can set USB parameters over
the WebUI to enable the external 3G router to automatically reset if the SmartLogger fails to
connect to the NetEco, email server, or FTP server within 30 minutes.
Because of permission restriction, log in as Advanced User. Choose Settings > USB to
access the target page.
Figure 7-66 USB configuration
7.9.5 Remotely Shutting Down SUN2000s in Dry Contact Mode
The SmartLogger can connect to SUN2000s over dry contacts and shut down the SUN2000s
over OVGR signals.
Issue Draft A (2017-02-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 WebUI
148