SmartLogger2000-(10-C, 11-C)
User Manual
7.10.6 Site Test
After a SUN2000 is put into use, it should be inspected periodically to detect any potential
risks and problems. The SmartLogger can inspect SUN2000s over the WebUI.
Because of permission restriction, log in as Advanced User or Special User. Choose
Maintenance > Onsite Test to access the target page.
Figure 7-76 Site test
7.10.7 Device Management
7.10.7.1 Connecting Devices
Because of permission restriction, log in as Advanced User or Special User. Choose
Maintenance > Connect Device to access the target page.
Issue Draft A (2017-02-15)
The spot-check function is available only for the SUN2000 for which Grid Code is set to Japan
standard.
You can click the Select icon in the upper left corner of the page to select an inspection mode.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 WebUI
156