SmartLogger2000-(10-C, 11-C)
User Manual
4.1 Precautions
4.2 Preparing an OT Terminal
Figure 4-1
Issue Draft A (2017-02-15)
This section describes how to connect the SmartLogger to inverters and other devices in the scenario
without a smart array controller.
In a scenario with a smart array controller, the SmartLogger is installed before delivery. Devices can
connect to the SmartLogger over RS485 communications cables or AC power cables. For detailed
operations, see the user manual for the appropriate smart array controller.
Ensure that all cables are connected securely.
The SmartLogger has no start key. Before the electrical connections for the SmartLogger
are complete, do not connect a power adapter to it.
shows how to prepare an OT terminal.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4
Electrical Connection
4 Electrical Connection
35