Huawei SmartLogger2000 User Manual page 67

SmartLogger2000-(10-C, 11-C)
User Manual
Figure 4-26 Removing the terminal block
Step 4 Connect cables to the terminal block and secure the cables.
Figure 4-27 Connecting cables
Step 5 Insert the terminal block into the DI port.
To enable the power grid dispatching function, you need to set the corresponding parameter
(for Active Power Control or Reactive Power Control) on the embedded WebUI after
connecting cables. For details, see
Control.
----End
Follow-up Procedure
Disconnection can be performed in reverse order.
Issue Draft A (2017-02-15)
Use a flat-head screwdriver to remove the terminal block.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8.1.1 Active Power Control
4 Electrical Connection
or 8.1.2 Reactive Power
59