SmartLogger2000-(10-C, 11-C)
User Manual
Correctly set the parameters in accordance with the Modbus parameters provided by the EMI vendor.
Otherwise, the EMI data cannot be correctly read.
Issue Draft A (2017-02-15)
Figure 7-30 EMI (1)
Synchronize Environment Data: If Enable is selected, wind speed and direction data will be sent
to the SUN2000 in a PV plant equipped with the tracker system.
Master/Slave: The SmartLogger2000-10-C and SmartLogger2000-11-C can connect to multiple
EMIs. When the SmartLogger connects to multiple EMIs, set one of them to master mode.
If a split EMI that supports Modbus-RTU is used, select Sensor(ADAM) from the
drop-down list box.
Figure 7-31 EMI (2)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 WebUI
115