Setting Running Parameters - Huawei SmartLogger2000 User Manual

SmartLogger2000-(10-C, 11-C)
User Manual
Figure 7-29 Querying EMI-related information

7.7.5.2 Setting Running Parameters

Connection over the COM Port
After the SmartLogger connects to the EMI, you need to add the device manually. For details,
see
Modbus-RTU.
Devices from different vendors may support different protocol specifications. To normally
obtain information from the connected EMI, correctly configure the protocol specifications on
the WebUI of the SmartLogger based on the protocol specifications delivered by the vendor.
Because of permission restriction, log in as Advanced User. Choose Monitoring > EMI >
EMI(COMX) > Running Param. and set EMI parameters.

Issue Draft A (2017-02-15)
 You can click the
the tertiary navigation menu to query EMI-related information.

EMI performance data can be stored for a month and exported. When changing the name of the
exported file, retain the extension .tar.gz. Otherwise, the file will be unusable.
7.10.7.1 Connecting Devices. Device Type should be set to EMI, and Comm.protocal to
X in COMX indicates any digit from 1 to 6. The actual COM port to which the EMI connects prevails.
If the EMI model is Jingzhou Yangguang (PC-4), Handan (RYQ-3), Kipp&Zonen SMPx,
or Lufft WSx-UMB, choose the appropriate model from the EMI model drop-down list
box directly.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
,
7 WebUI
, or tab on
114