Setting Running Parameters - Huawei SmartLogger2000 User Manual

SmartLogger2000-(10-C, 11-C)
User Manual

7.7.7.2 Setting Running Parameters

Because of permission restriction, log in as Advanced User. Choose Monitoring > PID >
Running Param. to access the target page.
Figure 7-37 Setting running parameters
Table 7-9 Parameter description
No Paramet Function
. er
1 Offset Specifies the
mode offset mode of the
PID module.
Issue Draft A (2017-02-15)
 You can click the
tab on the tertiary navigation menu to query PID module-related information.

Performance data of the PID module can be exported. When changing the name of the exported file,
retain the extension .tar.gz. Otherwise, the file will be unusable.
Value
Disabled
N/PE
PV/PE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
,
Description
Select Disabled if the PID module is not required.

PID01: Select N/PE if the PID module is required to
use voltage output from the inductor virtual midpoint.
 SmartPID2000: Select N/PE if the PID module is
required to use voltage output from the power grid.
 PID01: Select PV/PE if the PID module is required to
use voltage output from the negative PV terminal. This
mode is applicable only to Huawei SUN8000.
 SmartPID2000: N/A
7 WebUI
, , or
120