Huawei SmartLogger2000 User Manual page 187

SmartLogger2000-(10-C, 11-C)
User Manual
Figure 8-17 Remote scheduling
Reactive Power Control
Because of permission restriction, log in as Special User. Choose Settings > Reactive Power
Control to access the target page.
When Reactive Power Control Mode is set to Remote scheduling, the SmartLogger
receives the scheduling commands from the upstream NMS, converts them into valid
command data identifiable to the SUN2000s, and then sends the data to all the connected
SUN2000s. Based on the principle of preference of remote scheduling, the SmartLogger
automatically sets Reactive Power Control Mode to Remote scheduling after receiving a
scheduling command from the upstream NMS.
Issue Draft A (2017-02-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Power Grid Scheduling
179