EWA4B56008
WARNING
When maintenance or checks have been performed on components related to the ABS, be sure
to perform a final check before delivering the vehicle to the customer. (Refer to "[D-3] FINAL
CHECK" on page 8-144.)
EAS27830
[A] CHECKING THE ABS WARNING LIGHT
Turn the main switch to "ON". (Do not start the engine.)
1.The ABS warning light does not come on. [B-1]
2.The ABS warning light flashes. [B-2]
3.The ABS warning light remains on. [B-3]
4.The ABS warning light comes on for 2 seconds, then goes off. [B-4]
EAS4B56013
[B-1] THE ABS WARNING LIGHT FAILS TO COME ON
1.Only the ABS warning light fails to come on when the main switch is turned to "ON". [C-1]
2.The ABS warning light and all other indicator lights fail to come on. [C-2]
EAS4B56014
[B-2] THE ABS WARNING LIGHT FLASHES
1.Test coupler adapter
Check if the test coupler adapter is connected to the ABS test coupler.
G
If the test coupler adapter is connected, disconnect it, and then install the protective cap onto the
G
ABS test coupler.
If the test coupler adapter is not connected, refer to "[B-5] MALFUNCTION ARE CURRENTLY DE-
G
TECTED" on page 8-109.
EAS4B56015
[B-3] THE ABS WARNING LIGHT REMAINS ON
1.A malfunction is detected. [B-6]
EAS4B56016
[B-4] THE ABS WARNING LIGHT COMES ON FOR 2 SECONDS, THEN GOES OFF
Remove the protective cap from the ABS test coupler "1", and then connect the test coupler adapter
"2" to the coupler. The T/C terminal (sky blue) is now grounded.
1.The fault code "1" is displayed on the multi-function display (example: fault code AbS_11).
ABS (ANTI-LOCK BRAKE SYSTEM)
1
2
8-108