Maintenance Of The Front Wheel Sensor And Sensor Rotor - Yamaha 2009 Diversion XJ6S Service Manual

c. Remove the wheel bearings "3" with a gener-
al bearing puller.
ECA20S1009
NOTICE
Do not damage the front wheel sensor rotor.
d. Install the new wheel bearings and oil seals in
the reverse order of disassembly.
ECA14130
NOTICE
Do not contact the wheel bearing inner race
"4" or balls "5". Contact should be made
only with the outer race "6".
TIP
Use a socket "7" that matches the diameter of
the wheel bearing outer race and oil seal.
LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
EAS22010
MAINTENANCE OF THE FRONT WHEEL
SENSOR AND SENSOR ROTOR
ECA4B56004
NOTICE
Keep magnets (including magnetic pick-up
tools, magnetic screwdrivers, etc.) away
from the front wheel hub "1", otherwise the
wheel sensor rotor equipped in the wheel
hub may be damaged, resulting in improper
performance of the ABS system.
1
ABS wheel speed sensor and sensor rotor
G
ECA14450
NOTICE
Handle the ABS components with care
G
since they have been accurately adjusted.
Keep them away from dirt and do not sub-
ject them to shocks.
The ABS wheel sensor cannot be disas-
G
sembled. Do not attempt to disassemble it.
If faulty, replace with a new one.
Removing the front wheel sensor
1. Disconnect:
Front wheel sensor coupler "1"
G
2. Remove:
Clamp "1"
G
Front wheel sensor lead holder "2"
G
Brake caliper "3"
G
Front wheel sensor "4"
G
ECA4S81011
NOTICE
Be sure not to contact the sensor electrode
G
4-9
FRONT WHEEL
1