EAS24980
CHECKING THE OIL DELIVERY PIPES
1. Check:
Oil delivery pipe "1"
G
Oil pipe "2"
G
Damage → Replace.
Obstruction → Wash and blow out with com-
pressed air.
EAS24990
CHECKING THE OIL STRAINER
1. Check:
Oil strainer "1"
G
Damage → Replace.
Contaminants → Clean with solvent.
EAS25600
CHECKING THE OIL NOZZLES
The following procedure applies to all of the oil
nozzles.
1. Check:
Oil nozzle "1"
G
Damage/wear → Replace the oil nozzles.
O-ring "2"
G
Damage/wear → Replace.
Oil nozzle passage
G
EAS25620
CHECKING THE OIL PUMP DRIVE CHAIN
1. Check:
2
1
2. Check:
EAS25010
ASSEMBLING THE OIL PUMP
1. Lubricate:
2. Install:
5-44
Obstruction → Blow out with compressed air.
Oil pump drive chain "1"
G
Damage/stiffness → Replace the oil pump
drive chain, oil pump drive sprocket and oil
pump shaft as a set.
Oil pump drive sprocket
G
Cracks/damage/wear → Replace the oil
pump drive sprocket and the oil pump drive
chain as a set.
Inner rotor
G
Outer rotor
G
Oil pump shaft
G
(with the recommended lubricant)
Recommended lubricant
Lithium-soap-bused grease
Oil pump housing "1"
G
Oil pump shaft "2"
G
Washer "3"
G
Pin "4"
G
Inner rotor "5"
G
Outer rotor "6"
G
Dowel pins "7"
G
Oil pump cover "8"
G
Oil pump housing screw
G
OIL PUMP
1
2