Installing The Front Fork Legs - Yamaha 2009 Diversion XJ6S Service Manual

10.Install:
Spring "1"
G
Spring seat "2"
G
Spacer "3"
G
Cap bolt
G
TIP
Install the spring with the smaller pitch "a" fac-
G
ing up.
Before installing the cap bolt, lubricate its
G
O-ring with grease.
Temporarily tighten the cap bolt.
G
a. Smaller pitch
b. Lager pitch
EAS23050

INSTALLING THE FRONT FORK LEGS

The following procedure applies to both of the
front fork legs.
1. Install:
Front fork leg
G
Temporarily tighten the upper and lower
bracket pinch bolts.
TIP
Make sure the inner fork tube is flush with the
top of the handlebar holder.
2. Tighten:
Lower bracket pinch bolt "1"
G
Lower bracket pinch bolt
30 Nm (3.0 m·kgf, 22 ft·lbf)
Cap bolt "2"
G
Cap bolt
24 Nm (2.4 m·kgf, 17 ft·lbf)
Upper bracket pinch bolt "3"
G
Upper bracket pinch bolt
20 Nm (2.0 m·kgf, 14 ft·lbf)
EWA13680
WARNING
Make sure the brake hoses are routed prop-
erly.
4-67
FRONT FORK
1
2
3