D-Link xStack DGS-3420 Series Reference Manual page 8

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3420-28SC:admin# config ipif System ipaddress 10.24.22.100/255.0.0.0
Command: config ipif System ipaddress 10.24.22.100/8
Success.
DGS-3420-28SC:admin#
In the above example, the Switch was assigned an IP address of 10.24.22.100 with a subnet mask of
255.0.0.0. The system message Success indicates that the command was executed successfully.
The Switch can now be configured and managed via Telnet, SNMP MIB browser and the CLI or via
the Web-based management agent using the above IP address to connect to the Switch.
There are a number of helpful features included in the CLI. Entering the ? command will display a list
of all of the top-level commands.
DGS-3420-28SC:admin#?
Command: ?
..
?
cable_diag ports
cd
cfm linktrace
cfm lock md
cfm loopback
change drive
clear
clear address_binding dhcp_snoop binding_entry ports
clear address_binding nd_snoop binding_entry ports
clear arptable
clear attack_log
clear cfm pkt_cnt
clear counters
clear dhcp binding
clear dhcp conflict_ip
clear dhcpv6 binding
clear ethernet_oam ports
clear fdb
clear igmp_snooping data_driven_group
clear igmp_snooping statistics counter
CTRL+C ESC q Quit
When entering a command without its required parameters, the CLI will prompt you with a Next
possible completions: message.
SPACE n Next Page ENTER Next Entry a All
3