Table of Contents
Advertisement
2.
Under Mask Setting, in the Switch drop-down list, select On to enable the privacy mask
function (or select Off to disable the privacy mask feature), and then click the Set button
located directly below the drop-down list.
3.
In the Transparency drop-down list, select one of the following:
•
On to make the privacy mask transparent.
•
Off to make the privacy mask solid.
4.
In the Color drop-down list, select a color for the privacy mask (Black, White, Red,
Green, Blue, Cyan, Yellow, and Magenta), and then click the Set button located directly
below the Color drop-down list.
Figure 5-8
Privacy Mask Programming
5.
In the Live View screen, use the mouse to click and drag the video image to the video
position to be masked for privacy. To re-position the camera, place the mouse cursor over
the video image and left-click and drag in the direction you want to move the camera. The
red arrow icon (
the privacy mask (see
6.
In the Mask field, type a number for the privacy mask you are programming (from 1 to 16).
7.
In the Hsize field, type a value for the horizontal size (width) of the privacy mask (from 1 to
80). Select a large number to program a larger privacy mask.
8.
In the Vsize field, type a value for the vertical size (height) of the privacy mask (from 1 to
60). Select a large number to program a larger privacy mask.
9.
Click Add to apply the privacy mask settings that you have entered.
To edit a privacy mask position:
1.
Navigate to PTZ
Privacy Mask (see
2.
Under Mask Setting, in the Mask field, type a number for the privacy mask you are editing
(from 1 to 16).
) indicates the direction that the image will pan/tilt. When you add
step
9), the privacy mask will be added to the center of this image.
Figure
5-8).
Configuring PTZ Settings | 63
800-11873V2 - A - 07/2013
Advertisement
Table of Contents
