Figure 6-8 Record Stream To Sd Card Options; Figure 6-9 Ptz Function Options - Honeywell HDZ20HD User Manual

Hdz series 1080p ip ptz dome camera
Hide thumbs Also See for HDZ20HD:
Table of Contents

Advertisement

3.
In the Pre-trigger buffer drop-down list, select the number of pre-trigger frames/images (1
to 20) to send to the server. This option sets the amount of images from before an alarm is
triggered that will be uploaded by e-mail. The default setting is 5.
4.
In the Post-trigger buffer drop-down list, select the number of post-trigger frames/images
(1 to 20) to send to the server.
5.
To continue to upload images to the server for a specified time, or until the alarm ends,
select the Continue image upload check box, and choose one of the following:
Select Upload for [number] sec and enter a value from 1 to 9999 seconds.
Select Upload during trigger active.
Whichever option you select, you can also select how frequent the images should be
uploaded to the email server in the Image frequence [number] fps drop-down list. Select
an fps (frames per second) value from 1 to 15 fps, or select Max fps.
To upload images to an SD card that you have configured:
Note
A Micro SDHC card must be connected to the back panel of the camera for this
function to work. See
the Micro SDHC card.
1.
Under Triggered action, select the Record stream to Micro SD/SDHC card check box.
The record to SD card options will appear below the check box (see
Figure 6-8
Record Stream to SD Card Options
2.
In the Pre-trigger buffer field, enter the number of seconds of video to record before the
trigger occurs (from 1 to 9999).
3.
To continue to upload images for a specified period of time or until the alarm ends, choose
the option that fits your requirements from the following selections:
Select Upload for [number] sec and enter a time from 1 to 9999 seconds.
Select Upload during trigger active.
To assign a PTZ camera function:
1.
Under Triggered action, select the PTZ Function check box. The PTZ Function options
will appear below the check box (see
Figure 6-9
PTZ Function Options
Figure 2-5
and
Table 2-3
on
Figure
6-9).
Configuring Alarms | 81
page 25
for the location to install
Figure
6-8).
800-11873V2 - A - 07/2013

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdz20hdxHdz20hdexHdz20hde

Table of Contents