Table of Contents
Advertisement
54 | HDZ Series 1080p IP PTZ User Manual
To program a preset point:
1.
2.
3.
4.
5.
6.
To delete a preset point:
1.
2.
3.
To go to a preset point:
1.
2.
www.honeywell.com/security
Navigate to PTZ
Preset (see
In the Live View screen, click and drag the pointer to the desired preset position. To
re-position the camera, place the mouse cursor over the video image and left-click and
drag in the direction you want to move the camera. The red arrow icon (
the direction that the image will pan/tilt.
Adjust the zoom and focus using the Wide, Tele, Auto, Manual, Near, and Far buttons.
Under Preset setting, in the Num drop-down list, select a number from the drop-down list
for the current preset.
The first drop-down list contains preset numbers 1 through 10. The next list contains
numbers 11 through 20, and so on, up to 256. Click NextPage to go to the next list of
preset numbers. Click PrePage to return to the previous list of numbers.
In the Name field, type a descriptive name for the current preset. The preset name can not
contain any spaces.
Click Set to save the settings for the preset that you have programmed.
Note
You can also program a preset on the home page of the PTZ web client interface
(see
Figure 3-6
on
and zoom and focus controls to position the camera at the desired preset
position. Enter a preset number in the Preset Details field and click Set.
Navigate to PTZ
Preset (see
Under Preset setting, in the Num drop-down list, select the number of the preset that you
want to delete.
The first drop-down list contains preset numbers 1 through 10. The next list contains
numbers 11 through 20, and so on, up to 256. Click NextPage to go to the next list of
preset numbers. Click PrePage to return to the previous list of numbers.
Click Delete to delete the selected preset point.
Navigate to PTZ
Preset (see
Select the preset point you want to go to in the Preset go drop-down list.
If the preset you want to go to does not appear in the drop-down list, click NextPage or
PrePage in the Preset setting area until the correct preset list is selected.
Note
You can also go to a preset on the home page of the PTZ web client interface
(see
Figure 3-6
on
and click Goto to have the camera move to view the selected preset point.
Figure
5-1).
page
34). Use the PTZ controls (see
Figure
5-1).
Figure
5-1).
page
34). Enter the preset number in the Preset Details field
) indicates
Figure 3-7
on
page
36)
Advertisement
Table of Contents
