Connecting The Cables; Figure 2-5 Camera Back Plate Layout; Table 2-3 Camera Back Plate Connectors, Switches, And Buttons - Honeywell HDZ20HD User Manual

Connecting the Cables

Before connecting the cables, take a minute to familiarize yourself with the camera's back plate
connectors, switches, and buttons, as shown in
HDZ20HD(X) Indoor Dome Camera
B
F
G
Figure 2-5 Camera Back Plate Layout
E
C
A
D
Table 2-3 Camera Back Plate Connectors, Switches, and Buttons
A RJ45 connector (see
information)
B Alarm Input/Output (see
a
information)
C Power (see Connecting Power on page 28
D SD Memory Card Slot (install a microSDHC card from 8 to 32 GB, as needed).
See Micro SDHC Card Details on page 26
E Factory Reset Button
F Audio Input/Output (see
G Eyelet to secure camera to building with lanyard during camera setup
a
Alarm, Power and Audio connections are made with removable connectors.
b
Press the factory reset button to restore all camera settings to the factory default settings.
Figure 2-5 and
HDZ20HDE(X) Outdoor Dome Camera
F
D
G
Connecting the Network Cable on page 27
Connecting Alarm Inputs/Outputs on page 26
for more information)
for more information.
b
Connecting Audio on page 26
Installing the Camera | 25
Table 2-3 below.
B
E
C
A
for more
for more
a
for more information)
800-11873V2 - A - 07/2013
a