Figure 6-14 Upload Image By Ftp Options For Motion Detection - Honeywell HDZ20HD User Manual

Hdz series 1080p ip ptz dome camera
Hide thumbs Also See for HDZ20HD:
Table of Contents

Advertisement

86 | HDZ Series 1080p IP PTZ User Manual
3.
To send an alarm message to an FTP/email server that you have configured:
Under Triggered Action, select one or both of the following:
To upload images to an FTP server that you have configured:
1.
2.
3.
4.
5.
To upload images to an email server that you have configured:
1.
2.
www.honeywell.com/security
To continue to upload images for a specified period of time or until the alarm ends, choose
the option that fits your requirements from the following selections:
Select Upload for [number] sec and enter a time from 1 to 9999 seconds.
Select Upload during trigger active.
The Send message by FTP check box to send the message to the FTP server (see
Settings on page 75
for information on setting up an FTP server).
The Send message by E-Mail check box to send the message to the mail server (see
Server Settings on page 75
Under Triggered Action, select the Upload image by FTP check box. The FTP options
will appear below the check box (see
Figure 6-14
Upload Image by FTP Options for Motion Detection
In the FTP address drop-down list, select either FTP1 or FTP2 (see
notifications: on page 76
for information on setting up an FTP address).
In the Pre-trigger buffer drop-down list, select the number of pre-trigger frames/images (1
to 20) to send to the server.
In the Post-trigger buffer drop-down list, select the number of post-trigger frames/images
(1 to 20) to send to the server.
To continue to upload images to the server for a specified time, or until the motion alarm
ends, select the Continue image upload check box, and choose one of the following:
Select Upload for [number] sec and enter a value from 1 to 9999 seconds.
Select Upload during trigger active.
Whichever option you select, you can also select how frequent the images should be
uploaded to the FTP server in the Image frequence [number] fps drop-down list. Select
an fps (frames per second) value from 1 to 15 fps, or select Max fps.
Under Triggered Action, select the Upload image by E-Mail check box. The email
options will appear below the check box (see
In the E-Mail address drop-down list, select either E-Mail 1 or E-Mail 2 (see
email alarm notifications: on page 75
for information on setting up an email server).
Figure
6-14).
Figure
6-15).
for information on setting up an email address).
Server
To enable FTP alarm
To enable

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdz20hdxHdz20hdexHdz20hde

Table of Contents