Preset Tour Settings; Figure 5-4 Preset Tour Programming - Honeywell HDZ20HD User Manual

58 | HDZ Series 1080p IP PTZ User Manual

Preset Tour Settings

You can program up to eight preset tours that can consist of between 2 and 64 preset points in
each tour.
To program a preset tour:
1.
2.
3.
4.
www.honeywell.com/security
Note You must define at least two presets before you can program a preset tour.
See Preset Settings on page 53
points.

Navigate to PTZ Preset Tour.
Under Preset Tour setting, click Edit (see
(see Figure 5-5).
Figure 5-4 Preset Tour Programming
On the Preset Tour Set page
the number of the preset tour that you want to program (from 1 to 8).
For each preset that you want to assign to the preset tour, do the following:
a. In the Name drop-down list, select the name of the preset point to be part of the tour
(see Figure 5-5).
b. In the Dwell time box, type a value from 0 (fast dwell time) to 127 (slow dwell time).
c. In the Speed box, type a value from 0 (low speed) to 14 (high speed).
for more information on programming preset
Figure 5-4). The Preset Tour Set window opens
(Figure 5-5), in the Preset Tour line drop-down list, select