Table of Contents
Advertisement
Configuring System Settings
This chapter includes:
•
•
•
System Settings
The System screen is open by default when the System tab is selected. Here you can give the
HDZ Series 1080p IP PTZ camera a new host name and configure the camera's time-related
settings. See
Parameters List section of the System screen.
Setting a Host Name
By default, the HDZ Series 1080p IP PTZ dome camera is named with the model number of the
camera. If needed, the Administrator can rename the camera for their system:
1.
2.
Selecting the Camera Time Zone
1.
2.
System Settings, page 91
Network Settings, page 100
Maintenance Settings, page 111
Note
The System tab can only be accessed by the Administrator.
Viewing the System Parameters on page 115
Navigate to the System tab
Type a new name for the camera in the Host Name field. The host name can be up to 30
characters in length. Any of the following characters may be used: A–Z, a–z, 0–9,
!@#$%^'&-_~. Click Save.
Navigate to the System tab
Use the Time zone drop-down list to select the time zone that the camera is installed in
and click Save.
•
Security Settings, page 93
•
Recording and Storage Settings, page 107
•
Support Settings, page 115
System (see
Figure
7-1).
System (see
Figure
7-1).
7
for more information on the
800-11873V2 - A - 07/2013
7
Advertisement
Table of Contents
