28 | HDZ Series 1080p IP PTZ User Manual
Connecting Power
CAUTION
connections can be used. If using power over Ethernet (PoE+), please
connect the Ethernet cable to the camera's Ethernet port and plug the
other end of the cable into an IEEE 802.3at-2009 High Power over Ethernet
(PoE Plus) switch. If there is a need to operate the Heater for the Outdoor
model, you will be required to use the 24V AC cable to plug into the
camera's power connector and power the camera.
Refer to
power adapter.
www.honeywell.com/security
To power up the camera, either PoE+ or 24V AC power
Figure 2-8
and
Table 2-7
Note
Please use the minimum power adapter:
HDZ20HD(X) Indoor Camera: 24 V AC, 0.8 A / PoE+ 20 W.
HDZ20HDE(X) Outdoor Camera: 24 V AC, 2.0 A.
Figure 2-8
Main Power Adapter Input (Detail)
1
2
3
Table 2-7
Power Input Pin Definitions
Pin
Definition
1
24 V AC
2
FG
3
24 V AC
when connecting power to your camera through the main