Table of Contents
Advertisement
60 | HDZ Series 1080p IP PTZ User Manual
To stop running a preset tour:
In the Live View screen, use the mouse to click and drag the pointer to move the camera in any
direction, or click the Stop button located next to the preset tour options on the Home screen
(see
To delete a programmed preset tour:
1.
2.
Home Function
The home function ensures constant and consistent monitoring by preventing the camera from
idling for more than a set period of time. When the home function is enabled, the camera
automatically executes a user-defined PTZ function after a specific period of inactivity.
To program the home function:
1.
2.
3.
4.
5.
www.honeywell.com/security
Figure 3-6
on
page
34) to stop the tour.
Navigate to PTZ
Preset Tour.
Under Preset Tour run, in the Preset Tour line drop-down list, select the number of the
Preset Tour that you want to delete, and then click Delete (see
Navigate to PTZ
Home (see
Note
Be aware that you must enable the home function for your programmed home
function to be in effect (see
Under Home setting, in the Time field, type a value from 1 to 128 minutes to set the
camera idle time limit (period of inactivity before the home function executes).
In the Type drop-down list, select the PTZ function you want the camera to execute when
the camera idle time expires. Choose one of the following options:
• Preset
• Preset Tour
• Autopan
• Mimic Tour
In the Line drop-down list, type or select the number of the PTZ function that you have
chosen. The functions available for selection change depending on what Function Type is
selected (see
step
3).
Click the Set button located below the Line field to save the settings that you have entered
for the Home Function.
Figure
5-6).
page
61).
Figure
5-4).
Advertisement
Table of Contents
