3.
4.
Frame Rate Control Settings
If you have limited bandwidth available to transmit images, you can set up the number of image
frames to be displayed per second with the Frame Rate control options (see
versions support a frame rate from 1 to 30 fps. PAL versions support 1 to 25 fps.
To set up frame rate control:
1.
2.
3.
If you selected Multicast mode, enter the required information (IP address, video ports,
audio port, and TTL) in the fields given.
Click Save.
Note
Be aware that video smoothness will change depending on the frame rate
setting. Higher frame rates (30/25) will produce smooth video. Video smoothness
will reduce at lower and lower frame rate values.
Navigate to Streaming
Enter a frame rate setting for one or more of the following streams in the field given:
• MJPEG
• H.264-1
• H.264-2
Enter a Frame Rate value from 1 to 30 (NTSC), or 1 to 25 (PAL).
Click the Save button directly below the Frame Rate setting field you have modified.
Configuring Video and Audio Streaming | 49
Frame Rate Control.
Figure
4-4). NTSC
800-11873V2 - A - 07/2013