Table of Contents
Advertisement
80 | HDZ Series 1080p IP PTZ User Manual
To upload images to an FTP server that you have configured:
1.
2.
3.
4.
5.
To upload images to an email server that you have configured:
1.
2.
www.honeywell.com/security
Under Triggered action, select the Upload image by FTP check box. The FTP options
will appear below the check box (see
Figure 6-6
Upload Image by FTP Options
In the FTP address drop-down list, select either FTP1 or FTP2 (see
notifications: on page 76
for information on setting up an FTP address).
In the Pre-trigger buffer drop-down list, select the number of pre-trigger frames/images (1
to 20) to send to the server. This option sets the amount of images from before an alarm is
triggered that will be uploaded by FTP. The default setting is 5.
In the Post-trigger buffer drop-down list, select the number of post-trigger frames/images
(1 to 20) to send to the server.
To continue to upload images to the server for a specified time, or until the alarm ends,
select the Continue image upload check box, and choose one of the following:
•
Select Upload for [number] sec and enter a value from 1 to 9999 seconds.
•
Select Upload during trigger active.
Whichever option you select, you can also select how frequent the images should be
uploaded to the FTP server in the Image frequence [number] fps drop-down list. Select
an fps (frames per second) value from 1 to 15 fps, or select Max fps.
Under Triggered action, select the Upload image by E-Mail check box. The email
options will appear below the check box (see
Figure 6-7
Upload Image by E-Mail Options
In the E-Mail address drop-down list, select either E-Mail 1 or E-Mail 2 (see
email alarm notifications: on page 75
Figure
6-6).
Figure
6-7).
for information on setting up an email address).
To enable FTP alarm
To enable
Advertisement
Table of Contents
