78 | HDZ Series 1080p IP PTZ User Manual
Alarm Input Settings
The alarm input settings are configured in the Alarm Application section of the System tab.
Each alarm input must be configured separately. Select the alarm input you want to configure,
set the switch to on or off, specify the type (normally open or normally closed), and specify what
actions you want the camera to perform when the selected alarm is triggered (see the following
sections for more information).
Selecting an Alarm Input to Configure
Select an alarm input to begin configuring the alarm settings.
1.
2.
Setting the Alarm Status and Type
You can set the alarm switch to on or off and specify the alarm type based on whether the switch
is "normally open" or "normally closed".
1.
2.
www.honeywell.com/security
Figure 6-4
Alarm Application Settings
Navigate to System
Alarm Application (see
Under Alarm pin selection, select the alarm input you want to configure, and then click
Edit.
Under Alarm setting (see
the following:
•
On to enable the alarm.
•
Off to disable the alarm.
In the Alarm type drop-down list, select one of the following:
•
Normal open (for the alarm to trigger when the contact is closed).
•
Normal close (for the alarm to trigger when the contact is opened).
Figure
Figure
6-5), in the Alarm switch drop-down list, select one of
6-4).