Table of Contents
Advertisement
Motion Detection Settings
You can set up the camera to send an alarm notification when suspicious motion is detected.
An alarm is triggered when motion volume in the detected area reaches and/or exceeds a
predefined sensitivity threshold value. You can send a message to an FTP, email, or HTTP
server, or you can upload images to an FTP server, email server, or Micro SDHC card when the
suspicious motion is detected.
Setting the Motion Detection Status
The motion detection function is disabled by default. When the motion detection function is
activated, a pop-up window appears indicating the detected motion (as shown in
To enable motion detection:
1.
2.
3.
Setting the Motion Detection Window
A motion detection "window" or frame appears in the Live View screen to specify the area to
detect motion within (see
can move the window wherever you want in the Live View screen and you can adjust its size and
shape.
To add a motion detection window:
Click add to add a new motion detection window to the Live View screen (see
can add up to 10 windows. The active window has a red border.
To delete a motion detection window:
In the Live View screen, select the window that you want to delete (to make it the active window,
it will have a red border when active), and then click delete (see
Figure 6-11
Current Motion as Detected Window
Navigate to System
Motion detection (see
Under Motion Detection, select On.
Click Save.
Figure
The red line indicates the threshold
level of the motion sensitivity, as it
is currently set.
The blue line indicates the level of
motion that is currently being
detected by the camera.
Figure
6-12).
6-12). You can add up to 10 motion detection windows. You
Configuring Alarms | 83
Figure
6-11).
Figure
6-12). You
Figure
6-12).
800-11873V2 - A - 07/2013
Advertisement
Table of Contents
