Table of Contents
Advertisement
104 | HDZ Series 1080p IP PTZ User Manual
SNMP
The Simple Network Management Protocol (SNMP) lets you monitor and manage the camera
remotely. You can select the version of SNMP that you want to use (SNMPv1 or SNMPv2).
Enabling SNMP (Version 1 or 2)
1.
2.
3.
4.
5.
Activating Trap Reporting
Traps are used by the camera to notify the management server of important events or status
changes by means of an unsolicited SNMP message. To activate trap reporting:
1.
2.
3.
www.honeywell.com/security
Figure 7-10
SNMP Network Settings Screen
Navigate to System
Network
Choose one of the following:
•
To use SNMP version 1, select the Enable SNMP v1 check box.
•
To use SNMP version 2, select the Enable SNMP v2 check box.
In the Read Community field, specify the community name (password) for read-only
access to all supported SNMP objects. The default value is <public>.
In the Write Community field, specify the community name (password) for read/write
access to all supported SNMP objects (except read-only objects). The default value is
<private>.
Click Save.
Navigate to System
Network
Under Traps for SNMP v1/v2, select the Enable traps check box.
In the Trap address field, type the IP address of the management server.
SNMP (see
Figure
7-10).
SNMP (see
Figure
7-10).
Advertisement
Table of Contents
