Accessing The Camera From A Browser; Enabling Internet Explorer Activex Settings; Figure 3-3 Device Network Setup Window - Honeywell HDZ20HD User Manual

5.

Accessing the Camera from a Browser

Before accessing the camera, you may need to enable ActiveX settings.

Enabling Internet Explorer ActiveX Settings

To enable Internet Explorer ActiveX settings:
1.
2.
3.
4.
5.
6.
Note Contact your network administrator for advice on filling in the IP Address,
Gateway, Netmask and DNS fields.
Figure 3-3 Device Network Setup Window
Wait one minute for the new settings to take effect, and then click Device Search to
refresh the list of network cameras (see
Launch Internet Explorer.
Open the Tools menu, and click Internet Options.
Select the Security tab, and click Custom level.
Scroll down the Security Settings list until you see the ActiveX controls and plug-ins
settings section.
Scroll down to Automatic prompting for ActiveX controls, and select Enable.
Scroll down to Download signed ActiveX controls, and select Enable or Prompt.
Accessing the Camera | 31
If a static IP address is
assigned, users can select
the DHCP option to assign
the PTZ camera a dynamic
IP address.
Figure 3-1).
800-11873V2 - A - 07/2013