Table of Contents
Advertisement
5.
Click the Set button located next to Start point (see
Figure 5-3
Auto Pan Programming
6.
In the Direction drop-down list, select a direction for the auto pan path to run (Left or
Right).
7.
In the Live View screen, use the mouse to click and drag the video image to the end point
of the auto pan path, and then click the Set button located next to End point.
To run an auto pan path:
1.
Navigate to PTZ
Auto Pan (see
2.
Under Auto pan run, in the Auto pan path drop-down list, select the number of the auto
pan path that you want to run (from 1 to 4), and then click Run.
To stop running an auto pan path:
In the Live View screen, use the mouse to click and drag the pointer to move the camera in any
direction to stop auto panning.
To delete an auto pan path:
1.
Navigate to PTZ
Auto Pan (see
2.
Under Auto pan run, in the Auto pan path drop-down list, select the number of the auto
pan path that you want to delete (from 1 to 4), and then click Delete.
Configuring PTZ Settings | 57
Figure
5-3).
Figure
5-3).
Figure
5-3).
800-11873V2 - A - 07/2013
Advertisement
Table of Contents
