Table of Contents
Advertisement
Basic Network Settings
Assigning a Fixed IP Address
The camera is assigned a dynamic (DHCP) IP address by default. Use the Honeywell Device
Search tool to find the automatically assigned dynamic IP address (refer to
on a Network on page 29
If required, you can assign the camera a fixed (static) IP address. You can also assign a fixed IP
address in the Honeywell Device Search application (see
Camera on page 30
To assign the camera a fixed IP address:
1.
2.
3.
4.
for more information).
for more information).
Figure 7-8
Basic Network Settings Screen
Navigate to System
Network
Select the Use fixed IP address option in the General section of the screen.
Fill in the IP address, Subnet mask, Default gateway, Primary DNS, and Secondary
DNS fields.
Click Save under the PPPoE Password field.
Configuring System Settings | 101
Assigning a Static IP Address to the
Basic (see
Figure
7-8).
Finding the Camera
800-11873V2 - A - 07/2013
Advertisement
Table of Contents
