Deactivating The Station; User Options Menu - Honeywell MicroDock II Operating Manual

The LCD displays information about the docking modules, the model of the detector,
and the detector serial number.
If a detector is inserted but not activated, the LCD displays the following
message.
Press OK to acknowledge the error message.
Batteries: The batteries are tested during activation and continuously thereafter. If
battery power is extremely low, the low battery icon
Multi-media card (MMC): The MMC card icon ( ) displays continuously on the
normal operating screen when the MMC card is inserted. The MMC card records
a variety of data.
Passcode Protection: If the station is Passcode protected, the Passcode protect
icon displays on the normal operating screen.

Deactivating the Station

The station must be in the normal operating mode to deactivate. From the normal
operating screen, press and hold
displays.
The power down screen displays briefly before the station deactivates.

User Options Menu

The user options menu provides access to ten options. The following user options
are listed in the order they are displayed on the station LCD.
NOTe
Bump or calibration tests cannot be performed while the user options
menu is accessed. However, if a test is initiated before or while accessing
the user options menu, the test automatically begins when the user options
menu is exited.
To access the user options menu, complete the following:
1. Press and hold
If the station is Passcode protected, refer to
Passcode
2. Press
beside the required option, press
3. To exit the options menu and return to the normal operating screen, press
exit.
MicroDock II Automatic Test and Calibration Station
menu to access the first screen.
Protected.
or ^ to scroll to different options. When the
flashes.
(the rightmost button) until Powering Down
Entering User Options when
sel to select.
icon displays
25