Time/Date; Inlet Setup - Honeywell MicroDock II Operating Manual

Time/Date

The Time/Date option is used to adjust the time (hour/minute), the date (month/
day/year) and the day of the week (1-7) of the station.
To change the date, time, and/or day of the week, complete the following:
1. From the user options menu, press
option.
Press
NOTe
The time and date values can only be changed in the order they are
presented in this table. To bypass any time/date setting, press
station automatically retains the current value and proceeds to the next
date/time value.
The cursor automatically displays below the first value of the month. Each value is
selected, changed, and bypassed individually.
2. Press
sel to confirm the change. The cursor then automatically moves to the
second value of the month.
Or
Press
current value and proceeds to the second value of the month.
3. Repeat step #2 for the remaining time and date values.
4. Press
5. Press

Inlet Setup

The Inlet Setup option is used to setup the specific gas cylinders for bump checks
and calibrations. This option is used to
•
select the gas type(s)
•
enter the corresponding gas concentrations level(s), and
•
enter the gas cylinder lot # of each selected gas.
26
sel to confirm the selection and access the time/date screen.
mm: month
dd: day
yy: year
hh: hour
mm: minute
d: day of the week
Monday = 1, Tuesday = 2, Wednesday = 3, etc.
^ to toggle between 0 or 1. When the correct value displays, press
sel to bypass the first value. The station automatically retains the
exit to return to the user options menu.
exit again to return to the normal operating screen.
or
MicroDock II Automatic Test and Calibration Station
^ to scroll to the Time/Date
sel. The