Abort Option - Honeywell MicroDock II Operating Manual

If a gas conflict is detected by the station, the gas select screen automatically
displays.
Refer to the following sections,
resolve gas conflicts, refer to the following section Abort Option.

Abort Option

The Abort option is located in the gas type column and is used to quit the gas
conflict function.
If inlets have not been setup or are setup incorrectly, select Abort to exit the bump
check or calibration. Proceed to the user options menu and select the Inlet Setup
option.
To abort a gas conflict, complete the following:
1. From the gas conflicts screen, press
screen displays.
2. Press
3. When the
The station automatically exits the gas conflict and returns to the normal
operating screen.
42
Conflicts
or ^ to scroll to the Abort Test option.
displays beside Abort Test, press
and Not Found. Before proceeding to
more. The conflicts/not found
MicroDock II Automatic Test and Calibration Station
sel or press OK.