Honeywell MicroDock II Operating Manual page 29

Gas Type
Custom 4-Gas
Custom 3-gas
Custom 2-Gas
3 – Gas SO
Isobutylene
LEL
CO
CO
NOTe
The
displays when a field is selected and can be modified.
To select a gas type, complete the following:
From the required inlet screen, the
5. If the required gas type is displayed, press
concentration level. Proceed to the
6. To select a different gas type, press
that the field is activated. Press
types.
7. When the required gas type displays, press
confirm the new selection and to deactivate the field.
8. To enter the gas concentration level for the selected gas, proceed to the
following section
Or
Press
9. Press
MicroDock II Automatic Test and Calibration Station
Mi (3-gas mix)
2
2
zero / N (nitrogen)
2 2
Table 16. Inlets 2-5 – Available Gas Types
icon is used to scroll to different options and functions. The * icon
Gas Concentration
exit to return to the user options screen.
exit again to return to the normal operating screen.
Gas Concentration
ppm and %LEL
ppm and %LEL
ppm and %LEL
ppm and %LEL
ppm
%LEL
ppm
ppm
icon displays.
Gas Concentration Level
sel. The
or ^ to scroll through the list of gas
Level.
*
*
*
*
*
*
*
to move down to the gas
section.
changes to * to indicate
sel. The * changes to to
29