Conflicts - Honeywell MicroDock II Operating Manual

Conflicts

If a conflict occurs, it must be resolved to continue the bump check or calibration.
The option is provided to manually select a gas inlet or to accept the default inlet
that the station selects.
If one or more Conflicts display, complete the following steps or press
to quit the current bump/calibration.
1. Press
configured for more than one inlet.
The * icon displays on the far right side on the row of the gas that is setup
for more than one inlet. The * also indicates the inlet that the station has
selected as the optimum inlet.
2. Press
the bump check or calibration.
NOTe
If sel is not selected within 30 seconds, the station automatically defaults
to the inlet it has selected.
Or
3. Press
4. Press
left side of the inlet.
5. Press
MicroDock II Automatic Test and Calibration Station
more to access the gas type/inlet screen to view which gas is
OK to accept the inlet that is selected and automatically resume
or ^ to move the
sel to activate the inlet field. The * automatically displays on the
or ^ to scroll to the desired inlet (1-5).
icon to the gas that is in conflict.
cancel
43