Mounting The Microdock Ii - Honeywell MicroDock II Operating Manual

Mounting the MicroDock II

NOTe
When mounting two or more docking modules, each docking module
requires an individual set of wall mounting plates.
Because of the variety of surfaces that the station can be mounted to,
mounting screws are not provided.
The MicroDock II station can be easily mounted to a secure surface. To mount the
station, complete the following:
1. Determine a secure location where the station is to be mounted.
Using the screws that are provided, attach the wall mounting plates to the
station/docking modules.
MicroDock II Automatic Test and Calibration Station
Figure 11. Attaching the Wall Mounting Plate
Figure 12. Parts of the Wall Mounting Plate
Item Description
1 Wall mounting plate (2)
2 Grommet (4)
3 Phillips self-tapping screw (8)
Table 13. Mounting the MicroDock II
23