Passcode; Entering User Options When Passcode Protected - Honeywell MicroDock II Operating Manual

Passcode

The Passcode option is used to prevent unauthorized access to the user options
menu. When the station is Passcode protected,
screen.
NOTe
The Passcode is provided separately.
To enable/disable Passcode protection, complete the following:
1. From the user options menu, press
option.
2. Press
The current mode displays beside the Passcode option.
3. Press
4. When the desired option displays, press
deactivate the field (* changes back to :).
5. Press
Or
Press

Entering User Options When Passcode Protected

To access the user options menu when the station is Passcode protected, complete
the following:
1. From the normal operating screen, press
The enter Passcode screen displays.
The cursor displays below the first value.
2. Press
When the correct value displays, press
automatically moves to the next value.
3. Repeat step #2 for the remaining values.
4. Press
screen displays.
36
sel to select the option and activate the field (: changes to *).
Passcode protect enabled
Passcode protect disabled
or ^ to toggle between the options.
or ^ to scroll to another user option.
exit to return to the normal operating screen.
or ^ to scroll to the first number of the Passcode.
OK. If the correct Passcode is entered, the user options main
displays on the normal operating
or
sel to confirm the selection and
menu to access the user options.
sel to save the first value. The cursor
MicroDock II Automatic Test and Calibration Station
^ to scroll to the Passcode