Contrast; Backlight - Honeywell MicroDock II Operating Manual

Contrast

The Contrast option is used to brighten or darken the LCD. To adjust the contrast
level, complete the following:
1. From the user options menu, press
option.
2. Press
The contrast levels range from 2 (brightest) to 10 (darkest).
NOTe
The station is shipped with the contrast level set to 5.
3. Press
4. Press
back to :).
5. Press
Or
6. Press

Backlight

This Backlight option is used to enable, disable, or set to auto mode for the LCD
lighting. The auto option can be selected to automatically disable the backlight when
the station is not in use.
NOTe
The station is shipped with the auto backlight option enabled. While
operating from battery power only, select auto mode or
the batteries.
To enable/disable or select auto backlight, complete the following:
1. From the user options menu, press
option.
2. Press
32
sel to confirm the selection and activate the field (: changes to *).
or ^ to select the desired contrast level.
sel to save the new value and deactivate the field (* changes
or ^ to scroll to another user option.
exit to return to the normal operating screen.
sel to select the option and activate the field (: changes to *).
or
or
MicroDock II Automatic Test and Calibration Station
^ to scroll to the Contrast
(off) to conserve
^ to scroll to the Backlight