Format The Mmc Card - Honeywell MicroDock II Operating Manual

Format the MMC Card

This option is used to format the Multi-media card (MMC).
NOTe
If a previously formatted MMC card is used to reformat, all of the data on
the card will be erased.
To format an MMC card, complete the following:
1. Activate the station if required.
2. On the station, remove the cover from the battery compartment. Refer to
Battery Installation.
3. Insert the MMC card into the slot above the battery compartment.
NOTe
If the MMC card has never been formatted, the station will automatically
prompt to format the card (refer to step #5-6).
4. Press
5. Press
confirmation screen.
6. Press
When formatting is complete, the LCD automatically returns to the user options
screen.
34
Figure 13. Insert the MMC Card into the Station
or ^ to scroll to the Format MMC option.
sel to confirm the selection and to access the formatting
Yes to initiate formatting. The following screen displays.
MicroDock II Automatic Test and Calibration Station