Cisco Catalyst 4500 Series System Message Manual page 75

Chapter 2 Messages and Recovery Procedures
Error Message C4K_IOSMODPORTMAN-4-TEMPUNDERCRITICAL: Chassis temperature is now
under critical threshold but still very high - current temp:
critical threshold: [object-info] C
IOSMODPORTMAN-6
Error Message C4K_IOSMODPORTMAN-6-CLOCKSWITCHOVER: Chassis Clock Module switched to
Clock: [dec]
Error Message C4K_IOSMODPORTMAN-6-INLINEPOWERSUPPLYGOOD: Inline power from power
supply [dec] is Ok
Error Message C4K_IOSMODPORTMAN-6-POWERSUPPLYOUTPUTINCREASED: Power supply [dec]
output has increased
Error Message C4K_IOSMODPORTMAN-6-FANTRAYINSERTED:Fan tray has been inserted
Error Message C4K_IOSMODPORTMAN-6-FANTRAYINSERTEDDETAILED: Fan tray ([char] S/N:
[char] Hw: [dec].[dec]) has been inserted
OL-13091-01
Explanation The chassis temperature is now below the critical threshold. The chassis is still
operating above the normal temperature.
Recommended Action Inspect the chassis to determine the cause of the temperature problem. Cool the
system.
Explanation This indicates that the clock module switched over to another clock.
This is an informational message only. No action is required.
Recommended Action
The PoE power supply just inserted in [dec] is functioning normally.
Explanation
Recommended Action This is an informational message only. No action is required.
Explanation The indicated power supply output increased.
This is an informational message only. No action is required.
Recommended Action
The fan tray was inserted.
Explanation
This is an informational message only. No action is required.
Recommended Action
Explanation The fan tray was inserted.
This is an informational message only. No action is required.
Recommended Action
Catalyst 4500 Series Switch Cisco IOS System Message Guide
IOSMODPORTMAN Messages
[object-info] C,
2-57