Vqpclient Messages - Cisco Catalyst 4500 Series System Message Manual

VQPCLIENT Messages

VQPCLIENT Messages
This section contains VLAN Query Protocol (VQP) Client messages.
VQPCLIENT-2
Error Message VQPCLIENT-2-CHUNKFAIL: Could not allocate memory for VQP
Error Message VQPCLIENT-2-DENY: Host [enet] denied on interface [chars]
Error Message VQPCLIENT-2-INITFAIL: Platform-specific VQP initialization failed.
Quitting
Error Message VQPCLIENT-2-IPSOCK: Could not obtain IP socket
Error Message VQPCLIENT-2-PROCFAIL: Could not create process for VQP. Quitting
Catalyst 4500 Series Switch Cisco IOS System Message Guide
2-128
An error occurred when the system tried to allocate memory for the VQP client.
Explanation
Copy the message exactly as it appears on the console or in the system log,
Recommended Action
contact your technical support representative, and provide the representative with the gathered
information.
Explanation The VLAN Membership Policy Server (VMPS) denied access for the given host MAC
address to an interface. [enet] is the host MAC address, and [chars] is the interface name.
Recommended Action This is an informational message only. No action is required. If you think that
the host should have been allowed access, verify the configuration on the VMPS.
Explanation An error occurred during initialization of the VQP client platform-specific code.
Copy the message exactly as it appears on the console or in the system log,
Recommended Action
contact your technical support representative, and provide the representative with the gathered
information.
An error occurred when the system attempted to open an IP socket to the VMPS.
Explanation
If the error message recurs, copy the message exactly as it appears on the
Recommended Action
console or in the system log, contact your technical support representative, and provide the
representative with the gathered information.
Explanation An error occurred while creating a process for the VQP client.
Copy the message exactly as it appears on the console or in the system log,
Recommended Action
contact your technical support representative, and provide the representative with the gathered
information.
Chapter 2 Messages and Recovery Procedures
OL-13091-01