Cisco Catalyst 4500 Series System Message Manual page 53

Chapter 2 Messages and Recovery Procedures
Error Message EC-5-L3DONTBNDL2: [char] suspended: LACP currently not enabled on the
remote port.
Explanation
enabled. In this mode, the port is put in a suspended state.
Recommended Action
Error Message EC-5-NOLACP: Invalid EC mode
Explanation
Recommended Action
Error Message EC-5-NOPAGP:Invalid EC mode
Explanation
desirable/auto.
Recommended Action
Error Message EC-5-PORTDOWN: Shutting down [char] as its port-channel is admin-down
Explanation
state of the port to also be down. The administrative state of the port is controlled by the
administrative state of its aggregate port.
Recommended Action
aggregation port.
Error Message EC-5-STAYDOWN: [char] will remain down as its port-channel [char] is
admin-down
Explanation
channel is administratively down. Although this interface has an EtherChannel configuration, it has
no information about the port channel. The no shutdown command is not supported.
Recommended Action
Error Message EC-5-UNBUNDLE:Interface [char] left the port-channel [char]
Explanation
Recommended Action
OL-13091-01
LACP is enabled on a Layer 3 interface, but the partner port does not have LACP
Enable LACP on the remote side.
LACP is not included in the image. You cannot set EC mode to active or passive.
Upgrade to an image with LACP, or set the mode to On.
PAgP is not included in the image, so the EtherChannel mode cannot be set to
Obtain an image that includes PAgP, or set the mode to ON.
The administrative state of the aggregate port is down, which forces the administrative
Enter the no shutdown command on the aggregate port to activate the
An interface with EtherChannel configuration cannot be administratively up if its port
Wait for the module to come online.
The interface fell off the bundle.
This is an informational message only. No action is required.
Catalyst 4500 Series Switch Cisco IOS System Message Guide
EC Messages
2-35