Spd Messages; Sff8472 Messages - Cisco Catalyst 4500 Series System Message Manual

SPD Messages

Error Message C4K_S2W-4-STARTCALENDAROSCILLATORERR: Failed to start the calendar
Error Message C4K_S2W-4-WRITECALENDARERR: Calendar write operation Failed
SPD Messages
This section contains the SPD messages.
Error Message C4K_SPD-3-SDRAMDATAINVALID: Invalid Sdram Spd Data on DIMM module
[dec] . Total
Error Message C4K_SPD-3-SDRAMREADERROR: DIMM module
. Total Sdr am on the supervisor is

SFF8472 Messages

This section contains the floating-point subsystem (SFF8472) messages.
SFF8472-2
Error Message SFF8472-2-NOMEM: Not enough memory available for [char]
Catalyst 4500 Series Switch Cisco IOS System Message Guide
2-94
The calendar operation failed to start.
Explanation
Recommended Action This is an informational message only. No action is required.
The system was unable to write to the calendar.
Explanation
This is an informational message only. No action is required.
Recommended Action
Sdram on the supervisor is
There is a SDRAM SPD data checksum error, the data is invalid.
Explanation
Use the show platform spd sdram command for more details. If a DIMM
Recommended Action
module is bad, it needs to be returned to Cisco for replacement.
The system encountered a problem when reading SDRAM SPD data.
Explanation
Use the show platform spd sdram command for more details. If a DIMM
Recommended Action
module is bad, it needs to be returned to Cisco for replacement.
The SFF8472 subsystem could not obtain the memory that it needed.
Explanation
Recommended Action Contact your technical support representative.
Chapter 2 Messages and Recovery Procedures
[dec] MB.
[dec] Spd Read Error:
[dec] MB.
[char]
OL-13091-01