Ec-5 - Cisco Catalyst 4500 Series System Message Manual

EC Messages
Error Message EC-5-COMPATIBLE: [char] is compatible with port-channel members
Explanation
attributes of the port channel or the attributes of the interfaces within the port channel. The switch
detects that the attributes of the specified port now match the port-channel attributes.
Recommended Action
Error Message EC-5-DONTBNDL: [char] suspended: incompatible partner port with [char]
Explanation
ports in the bundle. A port can join the bundle only when the global configuration of the port and
the configuration of the partner port are the same as the other ports in the bundle.
Recommended Action
bundle.
Error Message EC-5-ERRPROT: Channel protocol mismatch for interface [char] in group
[dec]: the interface can not be added to the channel group
Explanation
Recommended Action
Error Message EC-5-ERRPROT2: Command rejected: the interface [char] is already part
of a channel with a different type of protocol enabled
Explanation
a channel with a different type of protocol enabled.
Recommended Action
Error Message EC-5-ERRPROT3: Command rejected: the interface [char] is already part
of a channel
Explanation
of a channel.
Recommended Action
Error Message EC-5-L3DONTBNDL1:[char] suspended: PAgP not enabled on the remote
port.
Explanation
enabled. In this mode, the port is put in a suspended state.
Recommended Action
Catalyst 4500 Series Switch Cisco IOS System Message Guide
2-34
The specified interface is not operational because its attributes are different from the
This is an informational message only. No action is required.
The configuration of the partner port is different from the configuration of the other
Ensure that the configuration of the partner ports is the same for all ports in the
The interface cannot be added to the channel group with the specified mode.
Change the channel group or the mode for the interface.
The interface cannot be selected for the specified protocol because it is already part of
Remove the interface from the channel group.
The interface cannot be unselected for the specified protocol because it is already part
Remove the interface from the channel group.
PAgP is enabled on the Layer 3 interface, but the partner port does not have PAgP
Enable PAgP on the remote side.
Chapter 2 Messages and Recovery Procedures
OL-13091-01