Cisco Catalyst 4500 Series System Message Manual page 45

Chapter 2 Messages and Recovery Procedures
Error Message DOT1X-5-ERR_VLAN_INTERNAL: The VLAN [dec] is being used internally and
cannot be assigned for use on the Dot1x port [char] Vlan
Explanation
Recommended Action
Error Message DOT1X-5-ERR_VLAN_INVALID: The VLAN [dec] is invalid and cannot be
assigned for use on
Explanation
Recommended Action
Error Message DOT1X-5-ERR_VLAN_NOT_ASSIGNABLE: Port [char] cannot be authenticated
into VLAN [dec]
Explanation
type, such as a regular VLAN to a PVLAN host port, a private VLAN to an access port, or any
VLAN to a routed or PVLAN promiscuous port. This can also occur when a PVLAN port has an
incomplete local configuration on the switch.
Recommended Action
Error Message DOT1X-5-ERR_VLAN_NOT_FOUND: RADIUS tried to assign non-existent VLAN
name [char] to dot1x port
Explanation
was not found in the VTP database.
Recommended Action
Error Message DOT1X-5-ERR_VLAN_RESERVED: The VLAN [dec] is a reserved vlan and cannot
be assigned for use on the Dot1x port [char] Vlan
Explanation
Recommended Action
Error Message DOT1X-5-ERR_VLAN_RSPAN_CONFIGURED: VLAN [dec] is configured as a
Remote SPAN VLAN
Explanation
802.1X enabled.
Recommended Action
all the ports in this VLAN.
OL-13091-01
The VLAN is used internally and cannot be assigned on this port.
Update the configuration so that this VLAN is not used.
the Dot1x port [char]
The VLAN specified is out of range and cannot be assigned on this port.
Update the configuration to use a valid VLAN.
Dot1x attempted to authenticate a port into a VLAN that is incompatible with the port
This is an informational message only. No action is required.
The RADIUS server tried to assign a VLAN to a client on a port, but the VLAN name
This is an informational message only. No action is required.
The specified VLAN is a reserved VLAN and cannot be assigned for use on this port.
Update the configuration so that this VLAN is not used.
Remote SPAN should not be enabled on a VLAN in which ports are configured with
Either disable remote SPAN configuration on the VLAN, or disable 802.1X on
Catalyst 4500 Series Switch Cisco IOS System Message Guide
DOT1X (802.1X) Messages
2-27