Configuring The Spa400 To Communicate With The Spa9000 - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual
Cisco small business pro voice system version 6.1
Hide thumbs
Also See for SPA921 - Cisco - IP Phone:
- Installation and configuration manual (163 pages) ,
- Product data (5 pages) ,
- Quick reference manual (2 pages)
Table of Contents
Advertisement
Configuring Phone Service and Voice Mail
Configuring the SPA400
STEP 5
NOTE
SPA9000 Voice System Installation and Configuration Guide for Web UI
Click Save Settings. The SPA400 will reboot. To reconnect to the web
administration server, enter the new IP address for the SPA400 in the browser
Address bar.
Configuring the SPA400 to Communicate with the SPA9000
In the following procedure, you use the SPA400 web configuration utility to enter
the information that enables the SPA400 to communicate with the SPA9000. You
also enter QoS settings to ensure good voice quality on your system. In addition,
you enter the codec settings.
This procedure is required whether you are using the SPA400 for PSTN access, for
voice mail service, or both.
SPA400 Setup tab > Basic Setup page
5
78
Advertisement
Table of Contents
