Upgrading The Firmware For The Ip Phones - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual

Connecting the Equipment
Installing the IP Phones
NOTE
STEP 1
STEP 2
SPA9000 Voice System Installation and Configuration Guide for Web UI

Upgrading the Firmware for the IP Phones

In this procedure, you install the most recent firmware files for the phones.
You need to repeat this procedure to upgrade each phone individually.
To find the IP address of the phone, complete the following tasks:
a. Press the Setup button on the phone keypad.
b. Scroll down to 9 - Network, and then press the Select soft key.
c. Make a note of the Current IP address that is displayed on the phone.
Use the administration computer to install the latest firmware for this model of IP
phone:
a. Extract the Zip file, and then run the executable file to upgrade the firmware.
Firmware Upgrade Warning
b. When the
c. In the next window that appears, enter the IP address of the phone, and then
click OK.
window appears, click Continue.
4
56