Typical Outbound Call Routing Examples - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual

Configuring Phone Service and Voice Mail
Outbound Call Routing
STEP 5
STEP 6
STEP 7
STEP 8
SPA9000 Voice System Installation and Configuration Guide for Web UI
SYNTAX: (<digit:>xx.)
EXAMPLE 1: A user presses 9 to access Line 1.
Call Routing Rule: (<:L1>9xx.)
Line 1 Dial Plan: (<9:>xx.)
EXAMPLE 2: A user presses 9 to access Line 1 and presses 8 to access Line 2.
Call Routing Rule: (<:L1>9xx. | <:L2>8xx.)
Line 1 Dial Plan: (<9:>xx.)
Line 2 Dial Plan: (<8:>xx.)
EXAMPLE 3: A user presses 9 to access Line 1 and presses 8 to access Line 2.
Line 2 is used as backup of Line 1.
Call Routing Rule: (<:L1,2>9xx. | <:L2>8xx.)
Line 1 Dial Plan: (<9:>xx.)
Line 2 Dial Plan: (<8:>xx. | <9:>xx.)
Repeat the previous step to configure each active line.
Click Submit All Changes.
To verify call routing rule, place an outbound call to an external cell phone or other
phone with caller ID, and confirm that the specified line was used for the call.
To verify that a backup line is working, disable the primary line first, and then place
a call to confirm that the call is transmitted through the backup line.

Typical Outbound Call Routing Examples

The following examples show how you can accomplish various call routing goals
by editing the call routing rule and the dial plans.
•
ITSP Only: Line 1 is configured for ITSP service. The user (in USA) would like to
press 9 to dial outbound (default configuration).
•
Call Routing Rule: (<:L1>9xx.)
•
Phone dial plan (US): (9,[3469]11S0 | 9,<:1408>[2-9]xxxxxx |
9,<:1>[2-9]xxxxxxxxxS0 | 9,1[2-9]xxxxxxxxxS0 | 9,011xx.
| 9,xx. | [1-8]xx)
•
Line 1 Dial plan: (<9:>xx.)
5
93