Getting To Know The Slm224P Switch - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual

Getting Started
Introducing Components of the SPA9000 Voice System
NOTE
SPA9000 Voice System Installation and Configuration Guide for Web UI
LED/Port
POWER
RESET
INTERNET
1-4 (Ethernet)

Getting to Know the SLM224P Switch

The SLM224P switch has 24 10/100 Copper ports with two shared Gigabit
copper or optical SFP ports (combo ports) for connecting the switch to the core
network.
In this guide, the SLM224P switch is used in all examples and illustrations. However,
various Cisco switches can be used with the SPA9000 Voice System. Cisco
recommends use of SLMxxxP, SRWxxxP and SRWxxxMP switch product families
with the SPA9000 Voice System.
Description
This port is used to connect the router to AC power,
using the provided power cable.
•
The Reset button has two functions:
•
If the Router is having problems connecting to the
Internet, press the Reset button for just a second with a
paper clip or a pencil tip. This is similar to pressing the
Reset button on your PC to reboot it.
•
If you are experiencing extreme problems with the
router and have tried all other troubleshooting measures,
press and hold in the Reset button for 10 seconds. This
action restores the factory defaults and clears all of the
Router's settings, such as port forwarding or a new
password.
Use this port to connect the router to a Broadband
Access device.
Use these ports to connect the router to network
devices, such as PCs, print servers, or additional
switches.
1
28