Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 83

Configuring Phone Service and Voice Mail
Configuring the SPA400
STEP 9
SPA9000 Voice System Installation and Configuration Guide for Web UI
b. If you connected PSTN lines to the ports on the SPA400, confirm that you can
place an external call to the phone number that is associated with the PSTN
line. The Auto Attendant answers the call. You can then dial one of the
extension numbers to verify that the call rings to the station. Also verify that a
voltage value appears under
c. Start Internet Explorer, and then enter the IP address of the SPA9000. Log on as
Admin, and then click Voice> Info. Verify that the
You may need to refresh the browser screen to see the new status.
Proceed as needed:
•
If you are using the SPA400 for voice mail service, continue to
Voice Mail Server and Voice Mail Users," on page
•
If you are not using the SPA400 for voice mail service, you have finished
configuring your SPA400.
Battery Level
.
Line 2 Status Registered
is
"Configuring the
82.
5
.
81